Aluminum form - a kind of frame-panel formwork systems used in the construction of reinforced concrete. The benefits that aluminum form has to steel counterparts - a smaller proportion of 1m2 shuttering frame (easier installation), corrosion resistance. Aluminum form is a frame modular panels. Dimensions of boards due to the parameters of the manufacturer or individually designed for a specific project. Shields can be either straight (flat) and spatial (angular or radial). Generally, aluminum panels manufactured shuttering small dimensions (up to 3.3 m) for the convenience of transportation and installation. Enlargement boards going in place. The main elements that make up the formwork aluminum:
aluminum frame - the majority of producers consists of a closed thin-walled (2-3 mm) of the profile complicated cross-section, the approximate to the square, at least - a lightweight version of the brackets (designed for smaller loads);
working surface (deck) - Laminated pressed birch plywood 18mm (at least - composite materials or PVC sheet), is attached to the aluminum frame with screws, place sealed joints;
locking wedge - the fastening element for connection of two adjacent shuttering panels aluminum;
screw coupling nut shrink - fixing elements opposed shields. Aluminum decking has the following parameters:
frame material - aluminum profile;
The average specific weight - 30 kg / m2;
Design load - 60-100 kPa;
The deflection at the maximum permissible load - 1/350;
The turnover of the working surface - up to 100 cycles;
Turnover frames - up to 450 cycles;
Thickness Profile - 2-3 mm;
panel width - from 0.25 m to 1.5 m;
board height - from 0.3m to 3,3m;
Transport and storage - in bundles no more than 10 pieces.

Download Non-Ferrous Metals Catalogue in PDF