Enameled wire refers to the popular mind the scope of electrical products - Winding wires. Winding wires are used to create motor windings, different machines, mills. These windings create a magnetic field inside the motor, which cannot be operated without the rotor or the armature, depending on the type of motor and the winding itself. The former Soviet Union produces more than 20 kinds of winding wire. They all have different materials of the wire and its coating. Among the coatings can be identified fiber glass, enamel, film, and many combination options. Most of them are made of copper. Another type is the high-resistance wire. Less than "running" can be regarded as enameled wire, aluminum, since it is less than the market. Enameled Aluminum is available in several variations - stamps. Most brands produce enameled wire DOEA 1 - D200A, DOEA 2 - D200A, PEEI1-130A, PEEI2-D200A, DOEA-155, DOEA-130-L PSDKT. Each of the marks has different thicknesses, but they are all included in the range of 0.4 to 2.5 mm. In general, the production of wires with enamel isolation meets GOST 26615-85 and abroad is IEC 60317-25 and IEC60317-0-3. insulation thickness is 1 or 2. Insulation Class 1 - the normal thickness of insulation, type 2 - reinforced insulation. Aluminium Electro-coated enamel-insulated, it has a high electrical conductivity and ensures correct operation of the engine at high voltages up to 5000V. Temperature resistance also depends on the brand, and is usually indicated on the labeling. Since the labeling only this characteristic is indicated by the figure, the temperature index is not difficult to determine. For example, enameled wire, aluminum DOEA 1 - D200A has a temperature index of 200, and can be used at temperatures above 200 degrees Celsius. Enameled Aluminum is used for winding motors of various production machines, engines experiencing thermal stress, working under heavy chemical or mechanical action.

Download Non-Ferrous Metals Catalogue in PDF