Nickel - an expensive metal, which has a number of advantages. It is resistant to the effects of high temperatures and corrosion. This viscous solid metal, perfectly amenable to polishing. In air at normal temperature coated dense oxide film which protects it from corrosion. Nickel is the primary element of superalloys that can withstand heat up to several hundred degrees, the effect of certain acids and alkalis.

Because nickel is produced a wide range of industry solutions, such as nickel rods of different brands and sizes. One type of nickel rods, which appear in our range, are nickel rods NP2 brand.

NP2 Nickel rods used in instrument making, mechanical engineering, electrical engineering. The main area where NP2 nickel rods are used, is the chemical industry. Most nickel rods are used in chemical and physical laboratories of scientific research institutes.

Mark NP2 nickel, which are made of nickel rods, obtained by melting of nickel. Nickel rods meet GOST 13083 and may be unmeasured pull a length of 1.5 to 4 m diameter to rolled to 60 mm in length from 1 to 3 m and rolled with a diameter greater than 60 mm and lengths from 1 m to 0.7, 5 meters. It is worth noting that if the customer requires a different length of nickel rods, we can make shipment of required sizes.

Nickel rods NP2 easily to different types of mechanical treatment: they can be rolled, forged, extruded, stamped.

Nickel rods must be free of cracks and free of foreign inclusions and dirt. Edge - just cut. Defects nickel rod surface must be within the permissible limits.

We offer a large selection of products from the alloy of nickel NP2 brand that can satisfy the needs of any customer. All our products are certified realized.